Home Improvement

TPO Roofing: An Informative Guide About TPO Roofing In California

Introduction

If you are a California resident and live on the top floor of your building, one common problem you can face in summer is the sun’s heat. Which directly comes to your rooms and almost roasts you if you do not use any cooling system. Don’t worry, and you are not alone who are facing problems due to hot weather. There are a lot of people in California who are also facing the same issue.

In this article, you will learn about how to save yourself from this heat energy efficiently. Following this post, you will read about TPO roofing in California, which can save you from the summer heat.

TPO roofing in California

These days, many people are using TPO roofing in their residential and commercial buildings. The primary purpose of TPO roofing is to protect you from sun heat and keep your living rooms cooler. This way, you can get many benefits from the TPO roof while living in California.

Meaning of TPO

TPO is abbreviated from “Thermoplastic Polyolefin” and is use as a single-ply membrane for insulating and protecting roofs with efficiency and improved performance.

How is TPO roofing made?

TPO is made of different kinds of synthetic and fabric reinforcement components. The synthetic material usually used in making TPO are different kinds of rubbers. This rubber is a mixture of the following material:

  • Polypropylene
  • Ethylene-propylene 

These rubbers are fabricated with the help of scrim, which stabilizes TPO and adds more insulation power to the final fabricated material. After mixing all the ingredients, the final shape of TPO roofing is in sheet form. These sheets are available in the market in the following measurements:

  • Ten feet wide TPO roofing
  • Twelve feet wide TPO roofing
  • Twenty-feet wide TPO roofing

These lengths of TPO roofing can be purchased for commercial or residential usage. Once purchased can be transported to the desired place for a ready installation.

Method of installation for TPO roofing in California:

Two popularly known methods are available for installing TPO roofing in California.

The first TPO roofing installation method is mechanically fastening it with the roof. In this method, TPO lengths are brought to the roof where they should be installed. Then with the help of mechanical frames, these TPO lengths fix with the roof.

The second method for installing TPO roofing is with the usage of adhesive materials. These adhesive materials are the bond that sticks the TPO onto the roof.

After the installation of TPO on the roof, the final connection between the different sheet lengths is made with the help of a hot air gun. This hot air glue welds these sheets together.

Age of TPO roofing

TPO roofing provides durable and long-lasting insulation from UV rays and solar heat to residential and commercial buildings. Its white color reflects the heat and light to cool your house. As a result, the inner building side keeps cool without using much energy. According to some credible sites, the age of TPO roofing is nearly more than 20 years. The age of roofing can vary according to its place of installation.

Conclusion

TPO roofing in California is a very healthy investment. It will benefit you, cooling your house and keeping your energy expenses under your budget.

FAQs

  • What are the pros of TPO roofing?

In addition to resisting dirt buildup, punctures, and tears, TPO is also straightforward to clean. As a result, you will need to clean your roof less often in the long run, saving you money.

  • What is the cost of TPO roofing?

You can expect to pay between $3.50 and $9.50 per square foot for a roof in most cases, regardless of the factors that influence it. The average cost of a TPO roof is between $7,000 and $11,500.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button