How to Get Water Out of an iPhone: A Complete Step-by-Step Drying and Repair Guide 2026

Our smartphones are indispensable in daily life, so it is no surprise that water accidents involving iPhones are common, whether it is a splash, a spill, or a full submersion. While many recent iPhone models boast improved water resistance, they are not entirely waterproof. Water resistance is a rating for fresh water under laboratory conditions, not a guarantee — and it says nothing about salt water, chlorinated pool water, soap, or a phone whose seals have aged.
A brief encounter with moisture can still lead to serious issues like short-circuited components, damaged ports, and long-term corrosion. Knowing what to do and what not to do right after your iPhone gets wet is critical to minimising damage and potentially saving the device. The next ten minutes matter more than the next ten hours, and the most important rule is the simplest: do not turn it on, do not charge it, and do not heat it. Everything in this guide follows from that.
Why Is Water Damage a Serious Problem for iPhones?
Although Apple has improved water resistance since iPhone 7, water damage can still affect the internal circuits and battery, the charging port, the screen and sensors, and the speakers and microphones. (The original also lists “the charging port and headphone jack”; modern iPhones have no headphone jack, so the charging port, speakers, and microphones are the openings that matter.) Water trapped inside can cause corrosion, short circuits, or permanent malfunction. Hence, swift and proper drying is essential.
Immediate Steps After Your iPhone Gets Wet
If your iPhone gets wet, the first thing you should do is turn it off immediately. Keeping the device powered while moisture is present inside can lead to short circuits and permanent damage. Do not wait to finish what you were doing, and do not plug it in to see if it charges — power and water together are the combination that destroys phones.
Next, remove any case, screen protector, or accessory that could trap moisture against the device’s surface. A case holds water against the phone and slows drying; take it off and dry it separately. Then, open the SIM card tray and take out the SIM card to allow better airflow and reduce the chance of water being trapped in small compartments. Dry the SIM card itself with a soft cloth and set it aside.
Afterward, gently dry the exterior using a soft microfiber cloth or paper towel. Hold the iPhone with the charging port facing downward and let gravity help the water drain out. The original’s guidance is slightly inconsistent here — its action table says “gentle taps”, while its steps section warns not to shake or tap the phone forcefully, as this can drive water deeper into its internal components. Follow the gentler version: hold the phone port-down, tilt it slightly, and let the water come out on its own. Do not shake it, and do not tap it hard.
| Action | Do | Don’t |
|---|---|---|
| Power | Turn off immediately | Don’t use or charge |
| Remove accessories | Case, SIM tray, etc. | Don’t force removal |
| Drying method | Use silica gel or airflow | Don’t use rice or a hair dryer |
| Handling | Hold port-down, gentle tilt | Don’t shake or insert objects |
| Next steps | Wait 24–48 hrs. Seek help if needed | Don’t open the device yourself |
How to Get Water Out of Your iPhone: Methods That Work
Once the phone is off and the outside is dry, the job is to get the moisture out of the inside. These are the methods the original recommends, in order of usefulness.
1. Use gravity and airflow. Hold the iPhone with the port facing down and place it in a dry, ventilated area to help water drain out. A spot near a fan or an open window, with air moving across the phone, is ideal. Natural airflow is slow but safe, and it is the method everything else supports rather than replaces.
2. Soft air blower or compressed air. Use gentle air to dislodge moisture, and avoid high-pressure air that could push water further in. Short, gentle bursts from a distance are the limit. Do not use a high-pressure airline or a powerful blower, and never blow into the port with your mouth — your breath is warm and humid, which is the opposite of what the phone needs.
3. Silica gel packets. Seal the iPhone in a container with silica gel for 24–48 hours to absorb moisture effectively. Silica gel is the small packet marked “do not eat” that comes with shoes, electronics, and vitamins. Use several packets, seal the phone in an airtight container with them, and leave it alone for the full period. This is the method the original recommends most strongly, and it is the right one: silica gel absorbs moisture from the air inside the container, which draws moisture out of the phone steadily and safely.
4. Desiccant drying box. Use a commercial drying box specifically designed for electronics, if available. Some phone repair shops offer these, and they work on the same principle as silica gel — controlled, dry air — with more capacity. If you have access to one, it is a good option.
What to Avoid When Trying to Get Water Out of Your iPhone
The mistakes are as important as the methods, because most water-damaged phones are made worse by what their owners do in the first hour.
Do not use heat. Avoid using heat or a hair dryer to dry your iPhone, as excessive heat can damage internal components or warp the device. Heat also drives moisture deeper before it evaporates it, and it can damage the battery — which is a sealed component that does not tolerate high temperatures. Do not put the phone in an oven, on a radiator, or in direct strong sunlight either.
Do not charge or power it on too soon. It is crucial not to charge or power on your iPhone too soon; doing so while moisture is still present can lead to short circuits and permanent damage. The 24–48 hour wait in the original is a minimum, not a target to beat. If you are unsure whether the phone is dry, wait longer — the cost of waiting is nothing, and the cost of powering on wet is the phone.
Do not insert objects into the ports. Refrain from inserting foreign objects like sticks or cotton swabs into the ports, as these can push water further inside or leave behind debris. A cotton swab sheds fibres; a toothpick can damage the contacts; a pin can short them. Leave the ports alone and let air and desiccant do the work.
Do not open the iPhone yourself. Lastly, avoid opening the iPhone yourself unless you are trained to do so, as this can void the warranty and risk further damage to its delicate internal parts. Modern iPhones are sealed with adhesive and require specialist tools and a replacement seal to close properly. If the phone needs opening, that is a job for a repair professional, not a kitchen table.
How to Check If Your iPhone Is Dry and Working
After 24–48 hours in a drying environment, inspect your iPhone carefully before you turn it on. Use a flashlight to look inside the ports for moisture or corrosion — any visible dampness, discolouration, or white or green residue means it is not dry yet, and you should give it more time. Check the SIM tray area too, and look at the screen for any fogging or water marks under the glass, which indicate moisture inside the display.
Then try powering it on and check all features: touchscreen, speakers, microphone, camera, charging port, and sensors. Make a test call, play audio through the speakers, take a photo, and plug in a charger — briefly, and watch for the liquid detection warning described below. If anything seems off — an unresponsive button, distorted audio, a screen that flickers, a battery that drains unusually fast — it is best to seek professional repair help rather than continuing to use the phone and hoping the problem goes away. If your iPhone shows signs of malfunction after drying, such as unresponsive buttons or distorted audio, it is advisable to seek professional help from Apple Support or a certified technician.
Understanding Apple’s Liquid Detection Warning
Modern iPhones are equipped with a built-in liquid-detection system that alerts users when moisture is present in the charging port. If you try to charge your iPhone and see a “Liquid Detected in Lightning Connector” or USB-C warning, it means the device has sensed moisture and is protecting itself from electrical damage. In this case, disconnect the charger immediately and allow the phone to dry naturally. Avoid overriding the warning unless it is an emergency, as charging while moisture remains can permanently damage the charging port or internal circuits. This feature acts as an extra layer of protection and can help prevent serious water-related issues if taken seriously.
Preventing Water Damage in the Future
- Invest in a waterproof case or pouch, especially near water. This is the single most effective protection, and it costs far less than a repair.
- Keep your iPhone away from liquids and humid environments. Do not take it into the bathroom during a hot shower, do not leave it beside a pool, and do not put it in a pocket with a leaking bottle.
- Regularly back up your iPhone to iCloud or a computer to protect your data. A backup does not save the phone, but it means a lost phone is an inconvenience rather than a disaster.
Frequently Asked Questions
What should I do first if my iPhone gets wet?
Turn it off immediately and remove all the accessories to prevent short-circuiting and trap-free drying.
Can I use rice to dry my iPhone?
No, rice is not reliable and may leave particles inside your phone. Use silica gel packets instead.
How long should I wait before turning my iPhone back on?
Wait at least 24–48 hours after drying it in a ventilated space or sealed container with silica gel. Longer is safer if you are unsure.
When should I seek professional help?
If your iPhone won’t power on, acts erratically, or shows internal water damage, visit a repair expert promptly.
What does “Liquid Detected” mean?
It means the iPhone has sensed moisture in the charging port and is protecting itself. Disconnect the charger and let the phone dry naturally; do not override the warning unless it is an emergency.
Conclusion
Water damage doesn’t always mean the end of your iPhone, but prompt and careful action is crucial. Turning the device off immediately, avoiding heat or DIY insertions into the ports, and using proven moisture-removal methods like silica gel or desiccant boxes can greatly improve the chances of recovery.
At the same time, being patient and allowing the phone to dry completely before powering it on is essential to avoid irreversible damage. If symptoms persist even after thorough drying, seeking professional help is the safest option. With proper care and preventive measures — a waterproof case, sensible habits, and regular backups — you can reduce the risk of water-related mishaps in the future and keep your iPhone functioning reliably.



